BSI LM0 is a high purity aluminum casting alloy that contains a minimum of 99.50% aluminum (1xx.x). It has the best corrosion resistance of all the aluminium casting alloys, but its poor foundry characteristics and low mechanical properties rule out this alloy for all but a few special applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and surface treatment. Filing Code: Al-495. Producer or source: British Standards Institution.

Uddeholm Alumec 89 is a high strength aluminum alloy that is recommended for blow molds, prototype molds, and short run molds with low demands on strength and wear resistance. This alloy is also suitable for many types of engineering applications. This datasheet provides information on physical properties, elasticity, and tensile properties. It also includes information on machining and joining. Filing Code: Al-496. Producer or source: Uddeholms AB.

L. Klein Bronze 3444 is a wrought copper-tin-lead-zinc-phosphorus alloy. The addition of tin increases its corrosion resistance and strength, while the addition of phosphorous increases wear resistance and stiffness. L. Klein Bronze 3444 combines high strength and fatigue resistance with high wear resistance, good machinability, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-939. Producer or source: L. Klein SA.

ATI 8-1-1 (UNS R54810) is a near-alpha alloy with aluminum being the alpha stabilizer, and the additions of molybdenum, vanadium, and iron resulting in small amounts of beta. This alloy is used in the annealed condition, and special duplex annealing procedures have been developed for thick sections such as bars and forgings. It is intended primarily for use at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ti-190. Producer or source: ATI.

南国赖特5251是一个锻造,non-heat-treatable, aluminum-magnesium-manganese alloy (5xxx series). It is about mid-way in the series of aluminum-magnesium alloys for alloying content and strength, which is very similar to that of alloy 5052. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-494. Producer or source: Austral Wright Metals.

Aurubis CuZn0.5 is a copper alloy deoxidized by the addition of zinc. It has good electrical conductivity (≥ 82% IACS), and higher strength as compared to pure copper. This alloy has very good welding and soldering properties because it is largely insensitive to hydrogen embrittlement. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Cu-938. Producer or source: Aurubis AG.

ATI 6-6-2 (UNS R56620) is a highly beta-stabilized, two-phase, alpha-beta titanium alloy which is a modification of the Ti-6Al- 4V system. Because of the higher beta stabilizing elements (additional vanadium plus iron and copper), this alloy has a higher strength potential than ATI Ti-6Al-4V alloy, but at a sacrifice of weldability and toughness. In most cases, the welding of ATI 6-6-2 is not recommended. It can be used in the annealed or solution treated and aged conditions. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ti-189. Producer or source: ATI.

Austral Wright 5083 is a wrought, non-heat-treatable, aluminum-magnesium-manganese-chromium alloy (5xxx series). It has the highest strength of the non-heat-treatable alloys but is not recommended for use at temperatures in excess of 65 °C (150 °F). It is among the most widely used aluminum alloys for marine applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Al-493. Producer or source: Austral Wright Metals.

KME Cu-PHC is a phosphorus-deoxidized copper that contains a minimum of 99.95% copper and low residual phosphorus. It has very high thermal and electrical conductivity, and good welding and soldering properties. The electrical conductivity of KME Cu-PHC is higher than that of Cu-HCP. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-937. Producer or source: KME Germany GmbH.

ATI CP Grade 17 Titanium is an unalloyed titanium grade that contains 0.04–0.08% palladium. This palladium-containing alloy extends the range of application of commercially pure (CP) titanium in hydrochloric, phosphoric, and sulfuric acid solutions. ATI CP Grade 17 Titanium is used in applications requiring excellent corrosion resistance in chemical processing or in storage applications where the media is mildly reducing or fluctuates between oxidizing and reducing. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ti-188. Producer or source: ATI.

Austral Wright 5052 is a wrought, non-heat-treatable, aluminum-magnesium-chromium alloy (5xxx series) that exhibits a good combination of strength, corrosion resistance, and formability in a wide range of rolled products. It is about mid-way through the series of aluminum-magnesium alloys for alloying content and strength. It has excellent fatigue properties, with an endurance limit of 115 MPa in the H32 temper and 125 MPa in the H34 temper. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-492. Producer or source: Austral Wright Metals.

Mueller Brass C48500, also known as leaded naval brass, is a wrought copper-zinc-lead-tin alloy. It is a high-zinc brass to which a small amount of tin is added to improve its corrosion resistance and also to impart higher strength. Tin, like arsenic, antimony, and phosphorus, reduces susceptibility to dezincification. Mueller Brass C48500 possesses good hot formability and is fairly well adapted to any hot working process including forging. Due to its lead content, the alloy has poor cold forming characteristics. Due to this limitation, this alloy is best suited for machining applications rather than typical cold working operations. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-936. Producer or source: Mueller Brass Company.

RAFFMETAL EN AB-Al Si10Mg (EN ab - 43000)是一个热-treatable, aluminum-silicon-magnesium casting alloy in ingot form for remelting. It is used extensively for producing sand and permanent mold castings for applications requiring a combination of excellent casting characteristics, high strength with fair elongation, and fair corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Al-491. Producer or source: Raffmetal S.p.A.

Austral Wright Copper Alloy 220 (UNS C22000), also known as 90/10 gilding metal, is a wrought copper-zinc alloy. It combines a rich golden color with the best combination of strength, ductility, and corrosion resistance of the plain copper-zinc alloys. It weathers to a rich bronze color and can be supplied in pre-patinated colors ranging from deep brown to green. Austral Wright Copper Alloy 220 has a lower rate of work hardening than the copper-zinc alloys with higher zinc content, such as alloys 260 and 272. This is an advantage in multistage pressing applications without interstage annealing. It has excellent deep drawing characteristics and resistance to pitting corrosion when exposed to severe weather and water environments. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: Cu-935. Producer or source: Austral Wright Metals.

Rio Tinto C355.2 is a heat-treatable, aluminum-silicon-copper-magnesium casting alloy (3xx.x series). It is available in the form of ingots for remelting, to be used for the production of sand and permanent mold castings. Alloy C355.0 is a higher purity, low iron version of alloy 355.0. Both the alloys are similar, except the lower iron in C355.0 provides better elongation and somewhat higher tensile strength. Alloy C355.0 is used in premium, high strength applications where castings are usually heat treated for maximum strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-490. Producer or source: Rio Tinto Limited.

Aurubis C12200 (Cu-DHP) is a phosphorus-deoxidized copper, that contains a minimum of 99.9% copper and high residual phosphorus (0.015–0.040%). It is the most widely used copper for tube and pipe but also finds widespread use for sheet and strip items. Aurubis C12200 exhibits better ductility than Cu-ETP and is adaptable for progressive drawing operations requiring few or no intermediate anneals. A major advantage of Aurubis C12200 is the freedom from hydrogen embrittlement susceptibility in reducing atmospheres. This advantage is utilized in the cladding of steel and subsequent reducing atmosphere anneals without incurring the embrittlement, which occurs when cladding with Cu-ETP. The electrical and thermal conductivity are lower when compared with Cu-ETP but adequate for many applications as exemplified by a major use of strip to produce air conditioning and refrigeration tubing by gas shielding arc welding techniques. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: Cu-934. Producer or source: Aurubis AG.

Böhler L022 is a nickel-chromium-molybdenum alloy that exhibits very good corrosion resistance, for example, outstanding resistance to pitting, crevice corrosion, and stress-corrosion cracking. It has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chloride ions. This alloy also has outstanding resistance to reducing aqueous media. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, and joining. Filing Code: Ni-781. Producer or source: voestalpine Böhler Edelstahl GmbH & Co KG.

Austral Wright Titanium Grade 12 (UNS R53400) is a titanium alloy that contains small additions of nickel and molybdenum. It is considerably superior to unalloyed titanium in several aspects, and is characterized by high strength, good ductility, and outstanding corrosion resistance. Austral Wright Titanium Grade 12 is used in mildly reducing conditions, or where conditions vary from oxidizing to reducing. It is particularly resistant to crevice corrosion in hot brines. AS 1210, and ASME Boiler and Pressure Vessel Code pre-qualify Austral Wright Titanium Grade 12 for use in pressure vessels up to 300 ºC (572 ºF). This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-187. Producer or source: Austral Wright Metals.

Austral Wright 5005 is a wrought, non-heat-treatable, aluminum-magnesium alloy (5xxx series) that exhibits moderate strength, good formability, and good resistance to corrosion in marine atmospheres. It is widely used for decorative and architectural applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-489. Producer or source: Austral Wright Metals.

Wieland B44 is a multi-alloy phosphor bronze containing 4% tin, 4% zinc and 4% lead. This makes it possible to achieve high mechanical strength and good spring properties. Wieland B44 exhibits excellent wear and corrosion resistance. It has good cold working and excellent machining properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance and wear resistance as well as heat treating and machining. Filing Code: Cu-933. Producer or source: Wieland-Werke AG.